LUFA Library

CDC Class Host Mode Configuration and State Structure. More...

#include <CDCClassHost.h>

Data Fields

struct {
   USB_Pipe_Table_t   DataINPipe
   USB_Pipe_Table_t   DataOUTPipe
   USB_Pipe_Table_t   NotificationPipe
struct {
   uint8_t   ControlInterfaceNumber
   struct {
      uint16_t   DeviceToHost
      uint16_t   HostToDevice
   }   ControlLineStates
   bool   IsActive
   CDC_LineEncoding_t   LineEncoding

Detailed Description

Class state structure. An instance of this structure should be made within the user application, and passed to each of the CDC class driver functions as the CDCInterfaceInfo parameter. This stores each CDC interface's configuration and state information.

Field Documentation

◆ Config

struct { ... } USB_ClassInfo_CDC_Host_t::Config

Config data for the USB class interface within the device. All elements in this section must be set or the interface will fail to enumerate and operate correctly.

◆ ControlInterfaceNumber

uint8_t USB_ClassInfo_CDC_Host_t::ControlInterfaceNumber

Interface index of the CDC-ACM control interface within the attached device.

◆ ControlLineStates

struct { ... } USB_ClassInfo_CDC_Host_t::ControlLineStates

Current states of the virtual serial port's control lines between the device and host.

◆ DataINPipe

USB_Pipe_Table_t USB_ClassInfo_CDC_Host_t::DataINPipe

Data IN Pipe configuration table.

◆ DataOUTPipe

USB_Pipe_Table_t USB_ClassInfo_CDC_Host_t::DataOUTPipe

Data OUT Pipe configuration table.

◆ DeviceToHost

uint16_t USB_ClassInfo_CDC_Host_t::DeviceToHost

Control line states from the device to host, as a set of CDC_CONTROL_LINE_IN_* masks. This value is updated each time CDC_Host_USBTask() is called.

◆ HostToDevice

uint16_t USB_ClassInfo_CDC_Host_t::HostToDevice

Control line states from the host to device, as a set of CDC_CONTROL_LINE_OUT_* masks - to notify the device of changes to these values, call the CDC_Host_SendControlLineStateChange() function.

◆ IsActive

bool USB_ClassInfo_CDC_Host_t::IsActive

Indicates if the current interface instance is connected to an attached device, valid after CDC_Host_ConfigurePipes() is called and the Host state machine is in the Configured state.

◆ LineEncoding

CDC_LineEncoding_t USB_ClassInfo_CDC_Host_t::LineEncoding

Line encoding used in the virtual serial port, for the device's information. This is generally only used if the virtual serial port data is to be reconstructed on a physical UART. When set by the host application, the CDC_Host_SetLineEncoding() function must be called to push the changes to the device.

◆ NotificationPipe

USB_Pipe_Table_t USB_ClassInfo_CDC_Host_t::NotificationPipe

Notification IN Pipe configuration table.

◆ State

struct { ... } USB_ClassInfo_CDC_Host_t::State

State data for the USB class interface within the device. All elements in this section may be set to initial values, but may also be ignored to default to sane values when the interface is enumerated.

The documentation for this struct was generated from the following file: